Faq

Home > Faq

How to deal with the water in the diesel generator set oil?

May 20, 2022
The oil of diesel generator sets can play the roles of lubrication, heat dissipation, cleaning, sealing, anti-corrosion and rust prevention, so most diesel generator sets have very high quality requirements for oil. This will cause the diesel generator set to fail to operate normally, and even cause the internal short circuit of the diesel generator set, resulting in equipment failure and reducing the service life of the generator set.
Diesel generator sets
 
       The oil of diesel generator sets can play the roles of lubrication, heat dissipation, cleaning, sealing, anti-corrosion and rust prevention, so most diesel generator sets have very high quality requirements for oil. It will cause the diesel generator set to not operate normally, and even cause the internal short circuit of the diesel generator set, causing equipment failure and reducing the service life of the set.
 
       1. The user can heat the oil in a test tube. If there is a slight sound of water in the oil and blisters can be observed, it means that there is water in the oil. At this time, the difference between the boiling points of the oil and water can be used to deal with it and continue heating. Wait until the blisters disappear and the water is completely restored, then cool the gasoline to room temperature and continue to use it.
       2. If the oil has been emulsified, you can add 1% to 3% phenol (carbonic acid) by weight of the oil to the oil as a emulsifier, stir while adding, and then preheat the oil for a period of time, and then let it stand for a while. Wait for the water and oil to separate. Completely remove moisture from the oil.
       3. You can use the instrument to remove the moisture in the diesel generator set, pour the emulsified oil into the serpentine heating tube, and stop heating with saturated steam through the serpentine tube. At the same time, air is introduced into the instrument to make the water in the oil volatilize. Then cool the oil so that the oil can be used normally.
 
       The above is the treatment method of diesel generator oil inflow water, I hope to help you