How much is a 100kw generator? What should I pay attention to when starting?

Cummins generator 100kw is an imported small diesel generator set, which can meet the electricity demand of users in most cases. It has a compact structure, small size and flexibility, and a small footprint. According to the market quotation survey in 2021, according to the needs of users for different configurations, the current quotation of 100kw Cummins generator set ranges from more than 60,000 to more than 70,000, which is a cost-effective diesel generator set.

100kw Cummins generator

 

Cummins generator 100kw is an imported small diesel generator set, which can meet the electricity demand of users in most cases. It has a compact structure, small size and flexibility, and a small footprint. According to the market quotation research in 2021, different configurations are required according to the needs of users. At present, the quotation of 100kw Cummins generator set ranges from more than 60,000 to more than 70,000. It is a cost-effective diesel generator set. What should we pay attention to when using diesel generator sets?

 

       1. Do not start without cooling water, add cooling water after starting, or start after adding boiling water

       If cooling water is added after the Cummins diesel generator set is running, it will easily cause the body parts to heat up too quickly and accelerate the wear of moving parts; adding cooling water after starting is also likely to cause the unit to burst, because the unit is suddenly cold in an extremely hot state. Destructive physical changes will occur. Sudden addition of 100°C boiling water to the cold body will also crack the cylinder head and body. Therefore, it is not allowed to add boiling water and start it. It should be added when the water temperature drops to 60-70°C. .

 

       2. It is strictly forbidden to start diesel generators with load

       After the 100kw Cummins diesel generator set is started, it should run without load for a certain period of time, and pay attention to observe whether the oil pressure is normal and whether there are abnormal phenomena such as oil leakage and water leakage. If there is no abnormality, increase the speed of the diesel engine to the rated speed of 1500 rpm , at this time the generator shows frequency 50HZ, voltage 400V, you can close the output air switch and put it into use.

 

       3. Pay attention to observe the working state of the unit during operation

       When the 100kw Cummins diesel generator is working, it is necessary to arrange a special person on duty, and often pay attention to observe a series of possible failures, especially the changes in oil pressure, water temperature, oil temperature, voltage, frequency and other important factors. In addition, pay attention to having enough diesel oil. If the fuel is interrupted during operation, it will objectively cause a load stop, which may cause damage to the generator excitation control system and related components.